For Better Performance Please Use Chrome or Firefox Web Browser

Publications

Journal Papers
sort descending
Electropolymerization of pyrrole and N-methylpyrrole on mild steel surface July 2003
Morphological Investigation of Polypyrrole Coating on Stainless Steel November 2006
EIS Investigation of Passive Film Formation on Mild Steel in Oxalic Acid Solution February 2008
Corrosion Behavior of 316L Stainless Steel Coated by Amorphous and Semicrystalline Polypyrrole February 2009
A review on self-healing coatings based on micro/nanocapsules July 2010
Electrodeposition of high Mo content amorphous/nanocrystalline Ni–Mo alloys using 1-ethyl-3-methyl-imidazolium chloride ionic liquid as an additive November 2011
Electrodeposition of high Mo content amorphous/nanocrystalline Ni–Mo alloys using 1-methyl-imidazolium chloride ionic liquid as an additive November 2011
Hydrogen degradation of steels and its related parameters, a review November 2011
Tung oil: An autonomous repairing agent for self-healing epoxy coatings April 2011
Investigating the effect of heat treatment on hydrogen permeation behavior of API X-70 steel November 2012
Effect of Surface Preparation on Corrosion Resistance of Electrochemically Deposited Ni-Mo Alloys in the Presence 1-Methyl-Imidazolium Chloride Ionic Liquid October 2012
Electrochemically Deposition of High Mo Content Amorphous/Nanocrystalline Ni-Mo Using Ionic Liquids as Additive October 2012
Synthesis and characterization of novel silver/L-phenylalanine-based optically active polyacrylate nanocomposite December 2012
Electrodeposited Ni-Mo–TiO2 Nanocomposite Coating with High Resistance to Corrosion in Nitric Acid Solution August 2012
Self-healing ability and adhesion strength of capsule embedded coatings—Micro and nano sized capsules containing linseed oil December 2012
Analysis of synergistic effect of nanozinc/nanoclay additives on the corrosion performance of zinc-rich polyurethane nanocomposite coatings July 2012
A Novel Aspect of Two Imidazolium-Based Ionic Liquids in Electrodeposition of Amorphous/Nanocrystalline Ni-Mo July 2012
An Investigation on Dislocation Density in Cold-Rolled Copper Using Electrochemical Impedance Spectroscopy March 2013
Reciprocating wear Resistance of Al-SiC Nano-composite fabricated by Accumulative Roll Bonding process September 2013
Corrosion inhibition of mild steel by Nettle (Urtica dioica L.) extract: polarization, EIS, AFM, SEM and EDS studies Fall 2013
Effect of Amonium Vanadate Nano-Particles on Experimental Diabetes and Biochemical Factors in Male Spargue-Dawly Rats March 2013
A comparative study on direct and pulsed current gas tungsten arc welding of 25Cr–35Ni heat resistant steel Spring 2014
Corrosion Behavior of Ultra Fine Grain Copper Produced by Accumulative Roll Bonding Process Summer 2014
INVESTIGATING THE CORROSION BEHAVIOR OF NANO STRUCTURED COPPER STRIP PRODUCED BY ACCUMULATIVE ROLL BONDING (ARB) PROCESS IN ACIDIC CHLORIDE ENVIRONMENT Summer 2014
INVESTIGATING THE CORROSION BEHAVIOR OF NANO STRUCTURED COPPER STRIP PRODUCED BY ACCUMULATIVE roll bonding (ARB) PROCESS IN ACIDIC CHLORIDE ENVIRONMENT Summer 2014
Corrosion Behavior of Ultra Fine Grain Copper Produced by Accumulative Roll Bonding Process February 2014
Nanosized scale roughness and corrosion protection of mild steel in hydrochloric acid solution and in the presence of Turmeric (Curcuma Longa) Extract as a green corrosion inhibitor: FTIR, polarization, EIS, SEM, EDS, AFM studies, and neural network model Summer 2014
Corrosion performance of rosemary-extract-doped TEOS: TMSM sol-gel coatings on 304L stainless steel Spring 2014
THE CORROSION RESISTANCE OF THE COMPOSITE COATINGS POLYANILINE/UREA-FORMALDEHYDE MICROCAPSULES CONTAINING HEALING AGENT Spring 2015
Microstructure characterization and mechanical properties of gas tungsten arc welded cast A356 alloy Spring 2015
Modeling and optimization of precipitation hardening heat treatment factors of Al2024 alloy using a two-level full factorial design Summer 2015
Microstructure characterization and mechanical properties of gas tungsten arc welded cast A356 alloy Spring 2015
Fabrication and wear characterization of an A413/Ni surface metal matrix composite fabricated via friction stir processing Winter 2015
Hardness and tensile properties of dissimilar welds joints between SAF 2205 and AISI 316L Spring 2016
Effect of pulse plating parameters on the structure and properties of electrodeposited Ni Mo films Summer 2016
Failure analysis of carbon steel components in a water bath heater and the influence of ethylene glycol concentration Summer 2016
Modified Sol–Gel Based Nanostructured Zirconia Thin Film: Preparation, Characterization, Photocatalyst and Corrosion Behavior Fall 2016
Dissimilar welding between SAF 2507 stainless steel and Incoloy 825 Ni-based alloy: The role of microstructure on corrosion behavior of the weld metals Winter 2017
Sigma phase-induced failure of AISI 310 stainless steel radiant tubes, Engineering Failure Analysis, Volume 82, December 2017, Pages 56-63 Winter 2017
Electrodeposition mechanism and corrosion behavior of multilayer nanocrystalline nickel-tungsten alloy, Electrochimica Acta Volume 258, 20 December 2017, Pages 883-899 Winter 2017
Electrodeposition mechanism and corrosion behavior of multilayer nanocrystalline nickel-tungsten alloy, Electrochimica Acta Volume 258, 20 December 2017, Pages 883-899 Winter 2017
Toxicity of chlorpyrifos against Rhyzopertha dominica and Tribolium confusum adults on different surfaces Summer 2017
Effect of number of passes on the corrosion behavior of Fe/Al surface composites produced by plasma spraying and friction stir processing Summer 2017
Characterisations of low phosphorus electroless Ni and composite electroless Ni-P-SiC coatings on A356 aluminium alloy, Transactions of the Institute of Metal Finishing, Volume 96, Issue 1, 2 January 2018, Pages 52-56 Spring 2018
Investigation the effects of Na2MoO4 as an inhibitor on electrochemical corrosion behavior of 316L stainless steel in LiBr solution, Zaštita Materijala, 2018, vol. 59, iss. 1, pp. 108-116 Spring 2018
Silica nanoparticles: A potential carrier of chlorpyrifos in slurries to control two insect pests of stored products, Entomologia Generalis Volume 37, Issue 1, 2018, Pages 77-91 Spring 2018

تحت نظارت وف بومی